Measuring guide

How to measure your windows

Measuring takes five minutes. Use a metal tape measure and write everything down in inches to the nearest 1/8".

Inside mount

The blind sits inside the window opening for a clean, built-in look.

  1. 1

    Measure the width inside the opening at the top, middle and bottom. Enter the smallest.

  2. 2

    Measure the height at the left, middle and right. Enter the smallest.

  3. 3

    Check the depth of the opening - some products need a minimum depth (shown in the configurator).

  4. 4

    Enter your exact measurements. Do not deduct anything - our factory makes the clearance deductions for inside mount.

Outside mount

The blind mounts on the wall or frame above the window, covering the opening and edges.

  1. 1

    Measure the opening width and height at the widest and tallest points.

  2. 2

    Decide how much overlap you'd like - most people add coverage beyond the opening for better privacy and light control.

  3. 3

    Enter the opening measurements and choose outside mount. The factory applies its standard outside-mount allowances.

  4. 4

    Make sure there's flat wall space above the window for the brackets.